F-NIS 23151
Version A
Early bird price
4 900,00 
  • extruder for 30/55ml cartridges along with pneumatic adapter
  • platform heated up to 120℃
  • tempered glass work table
  • working pressure up to 4 bar
  • compressor with a maximum working pressure of 6 bar included
  • starter set of dosing elements for printing (3x cartridge, 3x piston, 3x nozzle)
  • g-code post-processor
F-NIS 23151 + UV
Version B
Early bird price
5 500,00 
  • extruder for 30/55ml cartridges along with pneumatic adapter
  • platform heated up to 120℃
  • tempered glass work table
  • working pressure up to 4 bar
  • compressor with a maximum working pressure of 6 bar included
  • starter set of dosing elements for printing (3x cartridge, 3x piston, 3x nozzle)
  • g-code post-processor
  • UV module with 365nm and 405nm wavelengths
  • post-processor controlled diodes
F-NIS 23151 + UV + Heated printhead
Version C
Early bird price
6 400,00 
  • extruder for 30/55ml cartridges along with pneumatic adapter
  • platform heated up to 120℃
  • tempered glass work table
  • working pressure up to 4 bar
  • compressor with a maximum working pressure of 6 bar included
  • starter set of dosing elements for printing (3x cartridge, 3x piston, 3x nozzle)
  • g-code post-processor
  • UV module with 365nm and 405nm wavelengths
  • post-processor controlled diodes
  • heated head with the possibility of heating the 3ml cartridge to 60℃
Printheads
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Mauris ac magna luctus, gravida lorem eu, vulputate justo. Vestibulum vitae orci mi. Phasellus sodales orci quis lorem lobortis fringilla. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Proin risus mi, tempor sit amet metus non, facilisis tempus massa.
No data was found
Optional Accesories
No data was found
Syringe Barrels

The syringe barrels are used together with a precision-fit syringe barrel adapter for easy and safe attachment. In addition, they are used together with dispensing tips and dispensing tips caps with luer lock threads.

The clear syringe barrels are used for most generic applications and allows you to see the material inside the syringe barrel.

Size: 10ml
Price: 1,00 
Size: 30ml
Price: 1,10 
Size: 55ml
Price: 1,20 
Syring Barrel Pistons

The white syringe barrel pistons are designed to ensure that the pressure is evenly spread across the fluid surface in the syringe barrel to provide consistent dispensing and prevent air entrapment.
The wiper pistons also form a seal to prevent dripping and eliminate material waste by wiping the syringe barrel wall clean as fluid is dispensed.

The white standard syringe piston is a general purpose piston used for most fluids.

For: 10ml barrels
Price: 4,50 
For: 30/55ml barrels
Price: 4,50 
Dispensing Tips

Plastic Dispensing Tips

Tapered plastic dispensing tips for particle-filled materials or medium- to high-viscosity fluids.

Material: Polyethylene with a UV-light block additive

Size (Length): 31,75 mm

Diameter: 0.28mm
Price: 6,50 
Diameter: 0.41mm
Price: 6,50 
Diameter: 0.63mm
Price: 6,50 
Diameter: 0.84mm
Price: 6,50 
Diameter: 1.20mm
Price: 6,50 
Diameter: 1.50mm
Price: 6,50 

Stainless Dispensing Tips

These quality stainless steel dispensing tips are burr-free with an electro-polished cannula for an accurate and consistent flow. The dispensing tips are free of silicone and chloride.

Material:
Polypropylene, Stainless Steel

Size (Length):
25,4 mm (1,0″)

Diameter: 0.2mm
Price: 9,20 
Diameter: 0.41mm
Price: 9,20 
Diameter: 0.6mm
Price: 9,20 
Diameter: 0.84mm
Price: 9,20 
Diameter: 1.2mm
Price: 9,20 
Diameter: 1.5mm
Price: 9,20 

Teflon-lined Dispensing Tips

The Teflon®-lined dispensing tips are intended for use with low viscosity materials and cyanoacrylates, where it is important to prevent cyanoacrylate clogging and damage to substrates.

Material:
Polypropylene, Stainless Steel, Teflon

Size (Length):
25,4 mm (1,0″)

Diameter: 0.25mm
Price: 27,50 
Caps

End caps

Syringe barrel end caps are designed to secure an airtight seal to ensure no contaminants come into contact with the fluid inside the syringe barrel during storage and shipment.
The airtight seal also allows you to prefill syringe barrels to save time and reduce waste.

For: 10ml barrels
Price: 4,50 
For: 30/55ml barrels
Price: 4,50 

Tip caps, Luer Lock

The tip caps are designed with luer lock to secure an airtight seal to ensure no contaminants come into contact with the fluid inside the syringe barrel, e.g. during storage or shipment.
The airtight seal also allows you to prefill syringe barrels to save time and reduce waste.

The tip caps can be used with all syringe barrel sizes.

For: All barrels
Price: 2,70